GMT POWERPRESS
Powerpress.'C' type power press machines,Cross Shaft Power Press machines,Pneumatic clutch power press machines Wet clutch power press machines,straight-side power press machines, Servo power Press machines, Knuckle Joint power Press machines,Cold Forging power Press machines, Deep drawing powerpress machines.
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame  Chennai - 044-2489 6028 Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame  Coimbatore - +91-98409 11884 Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame  Bangalore - +91-99720 41883 Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
 Hyderabad - +91-98490 90128
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
 
C TYPE PRESS
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
  Cross Shaft- Shear Plate- Single Point- Dry Clutch- Fixed Stroke- Mechanical Power Press - C Frame
  Cross Shaft- HOLP- Single Point- Dry Clutch- Fixed Stroke- Mechanical Power Press - C Frame
 
  Cross Shaft- HOLP - Single Point- Wet Clutch- Fixed Stroke-Mechanical Power Press- C Frame
 
  Cross Shaft- HOLP -Single Point –Wet Clutch- Link Motion-Mechanical Power Press- C Frame
 
  Cross Shaft- HOLP- Double Point- Wet Clutch-Fixed Stroke-Mechanical Power Press- C Frame
 
  Cross Shaft –HOLP- Single Point- Wet Clutch- Adjustable Stroke-Mechanical Power Press- C Frame
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
STRAIGHT SIDE POWER PRESS
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
  Cross Shaft - HOLP -Single Point -Dry Clutch-Fixed Stroke- Mechanical Power Press- H Frame
  Cross Shaft- HOLP- Double Point- Wet Clutch- Fixed Stroke-Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP- Single Point- Dry Clutch- Fixed Stroke-Plunger Guided- Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP- Double Point- Dry Clutch-Fixed Stroke- Plunger Guided- Mechanical Power Press- H Frame
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
KNUCKLE JOINT
Cross Shaft- Fixed stroke- Knuckle joint -Link Motion- Mechanical Power Press- H Frame
SERVO PRESSES
Cross Shaft- Clutchless- Servo -Mechanical Power Press- H Frame
HIGH SPEED PRESSES
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame2
  Cross Shaft- Ungeared- High Speed- Fixed Stroke- Single Point- Mechanical Power Press- C Frame
  High Speed- HOLP- Dry Clutch- Fixed Stroke- Single Point- Mechanical Power Press- C Frame
 
  Cross Shaft- Dry Clutch- High Speed- Fixed Stroke- Single Point- Mechanical Power Press- C Frame
 
  Cross Shaft- HOLP -Dry Clutch-High Speed- Fixed Stroke-Single Point -Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP -Dry Clutch-High Speed- Fixed Stroke- Double Point- Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP- Dry Clutch-High Speed Fixed Stroke- Single Point- Mechanical Power Press- H Frame
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame3
Hydraulic Power Presses
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame4
  Hydraulic Press for Automobile Main Sill Forming
  Single-Column Hydraulic Straightening and Mounting Press
 
  High-Speed and High-Precision Hydraulic Press with Electrohydraulic Servo Nummrical Control
 
  Four-Column Double-Movement Hydraulic Stress for Sheet Metal Drawing
 
  Four-Column Single-Movement Hydraulic Press for Sheet Metal Drawing(stamping)
 
  Four-Column Hydraulic Press
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame5
 
Home   products   STRAIGHT SIDE POWER PRESS  
Cross Shaft - HOLP - Double Point - Wet Clutch- Fixed Stroke - Mechanical Power Press - H Frame
 
 
Cross Shaft HOLP Double Point Wet Fixed Mechanical Power Press H Frame
 
Main Features
  The whole press is authenticated by CE.
  Welded Steel plate framework with high intensity of machine body.
  Double crankshaft pitmen totally eliminating side forces by reverse rotation.
  Combined wet multi discs friction clutch and brake, imported dry type friction clutch and brake is optional.
  Eight-side lengthened guide with high precision.
  Equipped with hydraulic overload protecting device.
  Electric compelling grease lubrication system.
  Duplex valves with monitoring system.
  Safety light curtain according to European class four standard.
  Electronic cam device with intelligent top dead center stop function and several safety function.
  Controlled by PLC with international brand.
  Electrical cabinets, contactors, push buttons and indicators are all from international brand.
  Equipped with several safety relays which meet European class four standard requirements.
  Optional air cushion device, NC feeding machine and inverter with international brand to fulfill stroke adjustment.
 
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
Press Specifications
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame jm36-100
jmd36-110		 jm36-160
jmd36-160		 jm36-200
jmd36-200		 jm36-250
jmd36-250
Nominal force kN 1100 1600 2000 2500
Stroke under nominal force mm 5 6 7 8
Slide block stroke mm 180 200 250 280
Number of stroke Fixed min-1 50 45 35 30

Variable

 35~65 30~55 25~45 20~35
Max die set height mm 400 450 500 550
Die set height adjustment mm 90 100 110 120
Worktable dimensions （F・B × L・R） mm 680x1650 760x1850 840x2200 920x2300
Thickness of bolster mm 130 150 170 180
Dimensions of side block bottom surface （F・B × L・R） mm 580x1360 660x1580 740x1850 820x2000
Size of the handle hole（Diameter× Depth） mm 3-φ60x70 3-φ60x75 3-φ60x90 3-φ60x90
Distance between columns of body mm 1750 1970 2300 2500

Dimensions of side hole
（F・B × L・R）
(Calculation from the plane of worktable)

 mm 650x350 700x380 800x420 860x470
Distance between upper surface of bolster and ground mm 950 970 1000 1100
Main motor capacity kW 15 18.5 22 30
Cushion
(Optional)		 Number   2 2 2 2
Knock out force kN 55 80 100 125
Knock out stroke mm 70 80 90 100
Knock out Area mm 370x520 420x620 470x720 520x820
Outline dimension （F・B × L・R × H） mm 2250x2370
x3500		 2480x2590
x3610		 2680x3120
x3930		 2880x3370
x4280
Net weight kg 21000 26000 33000 42000
 
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame jm36-315
jmd36-315		 jm36-400 jm36-500
Nominal force kN 3150 4000 5000
Stroke under nominal force mm 8 10 10
Slide block stroke mm 280 280 280
Number of stroke Fixed min-1 25 20 18

Variable

 20~30 18~25 15~20
Max die set height mm 600 650 700
Die set height adjustment mm 120 120 120
Worktable dimensions （F・B × L・R） mm 1000x2400 1100x2500 1200x2900
Thickness of bolster mm 190 200 210
Dimensions of side block bottom surface （F・B × L・R） mm 900x2100 1000x2200 1100x2600
Size of the handle hole（Diameter× Depth） mm 3-φ70x95 3-φ70x95 3-φ80x100
Distance between columns of body mm 2600 2700 3100

Dimensions of side hole
（F・B × L・R）
(Calculation from the plane of worktable)

 mm 900x500 1020x550 1040x600
Distance between upper surface of bolster and ground mm 1120 1120 1150
Main motor capacity kW 37 45 55
Cushion
(Optional)		 Number   2 2 2
Knock out force kN 125 125 125
Knock out stroke mm 100 100 100
Knock out Area mm 520x820 520x820 520x820
Outline dimension （F・B × L・R × H） mm 3220x3520
x4580		 3310x3640
x4580		 3880x4080
x4750
Net weight kg 49000 55000 68000
 
Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
   Powerpress HFrame Wetclutch-Cross Shaft HOLP Double Point WetClutch Fixed Mechanical Power Press H Frame
Valid CSS!Valid XHTML 1.0 Transitional
Home | Company Profile | Products | Online Enquiry | Contact Us
Copyright © 2010 GMT Power Press, All rights reserved
Web Designed and Developed by
Domain Registration, Web hosting, Web Design and Development, E-commerce Development, Search Engine Optimization(SEO), CBT Projects (Computer Based Training Projects), Corporate Presentation, Graphic Design, Multimedia and Corporate Branding Solutions.
 
 
 
 
 
 
For Corporate Details please visit :
www.gmtengineers.com
For Press Brake please visit :
www.gmtpressbrake.com
For Shearing Machine please visit :
www.gmtshears.com