GMT POWERPRESS
Powerpress.'C' type power press machines,Cross Shaft Power Press machines,Pneumatic clutch power press machines Wet clutch power press machines,straight-side power press machines, Servo power Press machines, Knuckle Joint power Press machines,Cold Forging power Press machines, Deep drawing powerpress machines.
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame1  Chennai - 044-2489 6028 Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame2  Coimbatore - +91-98409 11884 Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame4  Bangalore - +91-99720 41883 Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame5
 Hyderabad - +91-98490 90128
 
C TYPE PRESS
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame
  Cross Shaft- Shear Plate- Single Point- Dry Clutch- Fixed Stroke- Mechanical Power Press - C Frame
  Cross Shaft- HOLP- Single Point- Dry Clutch- Fixed Stroke- Mechanical Power Press - C Frame
 
  Cross Shaft- HOLP - Single Point- Wet Clutch- Fixed Stroke-Mechanical Power Press- C Frame
 
  Cross Shaft- HOLP -Single Point –Wet Clutch- Link Motion-Mechanical Power Press- C Frame
 
  Cross Shaft- HOLP- Double Point- Wet Clutch-Fixed Stroke-Mechanical Power Press- C Frame
 
  Cross Shaft –HOLP- Single Point- Wet Clutch- Adjustable Stroke-Mechanical Power Press- C Frame
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame
STRAIGHT SIDE POWER PRESS
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame7
  Cross Shaft - HOLP -Single Point -Dry Clutch-Fixed Stroke- Mechanical Power Press- H Frame
  Cross Shaft- HOLP- Double Point- Wet Clutch- Fixed Stroke-Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP- Single Point- Dry Clutch- Fixed Stroke-Plunger Guided- Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP- Double Point- Dry Clutch-Fixed Stroke- Plunger Guided- Mechanical Power Press- H Frame
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame8
KNUCKLE JOINT
Cross Shaft- Fixed stroke- Knuckle joint -Link Motion- Mechanical Power Press- H Frame
SERVO PRESSES
Cross Shaft- Clutchless- Servo -Mechanical Power Press- H Frame
HIGH SPEED PRESSES
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame9
  Cross Shaft- Ungeared- High Speed- Fixed Stroke- Single Point- Mechanical Power Press- C Frame
  High Speed- HOLP- Dry Clutch- Fixed Stroke- Single Point- Mechanical Power Press- C Frame
 
  Cross Shaft- Dry Clutch- High Speed- Fixed Stroke- Single Point- Mechanical Power Press- C Frame
 
  Cross Shaft- HOLP -Dry Clutch-High Speed- Fixed Stroke-Single Point -Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP -Dry Clutch-High Speed- Fixed Stroke- Double Point- Mechanical Power Press- H Frame
 
  Cross Shaft- HOLP- Dry Clutch-High Speed Fixed Stroke- Single Point- Mechanical Power Press- H Frame
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame
Hydraulic Power Presses
  Hydraulic Press for Automobile Main Sill Forming
  Single-Column Hydraulic Straightening and Mounting Press
 
  High-Speed and High-Precision Hydraulic Press with Electrohydraulic Servo Nummrical Control
 
  Four-Column Double-Movement Hydraulic Stress for Sheet Metal Drawing
 
  Four-Column Single-Movement Hydraulic Press for Sheet Metal Drawing(stamping)
 
  Four-Column Hydraulic Press
 
Home   products   STRAIGHT SIDE POWER PRESS  
Cross Shaft - HOLP -Single Point - Dry Clutch-Fixed Stroke - Mechanical Power Press - H Frame
 
 
Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame
 
Main Features
  The whole press is authenticated by CE.
  Welded Steel plate framework with high intensity of machine body.
  Imported dry type friction clutch and brake.
  Eight-side lengthened guide with high precision.
  Equipped with hydraulic overload protecting device.
  Electric compelling grease lubrication system.
  Equipped with lifting balance cylinder.
  Duplex valves with monitoring system.
  Safety light curtain according to European class four standard.
  Electronic cam device with intelligent top dead center stop function and several safety function.
  Controlled by PLC with international brand.
  Electrical cabinets, Contactors, Push buttons and Indicators are all from international brand.
  Equipped with several safety relays which meet European class four standard requirements.
  Optional air cushion device, NC feeding machine and inverter with international brand to fulfill stroke adjustment.
 
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame
Press Specifications
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame jm31-160
jmd31-160		 jm31-200
jmd31-200		 jm31-250
jmd31-250		 jm31-315
jmd31-315
Nominal force kN 1600 2000 2500 3150
Stroke under nominal force mm 6 6 8 8
Slide block stroke mm 160 180 200 200
Number of stroke Fixed min-1 40 35 30 30

Variable

 35~50 30~40 25~35 25~35
Max die set height mm 350 450 500 550
Die set height adjustment mm 110 110 120 120
Worktable dimensions （F・B × L・R） mm 740x1050 760x1130 800x1200 850x1250
Thickness of bolster mm 150 160 170 170
Dimensions of Slide block bottom surface （F・B × L・R） mm 650x800 650x850 700x900 750x950
Size of the handle hole
（Diameter × Depth）		 mm φ65x90 φ65x90 φ70x90 φ70x90
Distance between columns of body mm 1150 1200 1320 1370
Dimensions of side hole （F・B × H）
(Calculation from the plane of worktable)		 mm 760x300 800x370 820x430 880x480
Distance between upper surface of bolster and ground mm 1030 1030 1050 1050
Main motor capacity kW 15 18.5 22 30
Cushion
(Optional)		 Number   1 1 1 1
Knock out force kN 160 160 250 250
Knock out stroke mm 80 80 80 80
Knock out Area mm φ350 φ350 340x540 400x540
Outline dimension （F・B × L・R × H） mm 2480x1750
x3500		 2570x1810
x3610		 2950x2080
x3850		 3150x2200
x4000
Net weight kg 20000 24000 31000 36000
 
Powerpress H frame-Cross Shaft HOLP Single Point Dry Fixed Mechanical Power Press H Frame jm31-400 jm31-500 jm31-630
Nominal force kN 4000 5000 6300
Stroke under nominal force mm 10 10 10
Slide block stroke mm 200 200 250
Number of stroke Fixed min-1 25 20 18

Variable

 20~30 / /
Max die set height mm 600 650 700
Die set height adjustment mm 120 120 120
Worktable dimensions （F・B × L・R） mm 900x1350 1000x1500 1200x1700
Thickness of bolster mm 180 190 200
Dimensions of Slide block bottom surface （F・B × L・R） mm 800x1050 900x1200 1100x1450
Size of the handle hole
（Diameter × Depth）		 mm φ80x90 φ80x90 φ90x100
Distance between columns of body mm 1550 1700 1900
Dimensions of side hole （F・B × H）
(Calculation from the plane of worktable)		 mm 920x520 1020x600 1100x650
Distance between upper surface of bolster and ground mm 1050 1060 1050
Main motor capacity kW 37 45 75
Cushion
(Optional)		 Number   1 1 1
Knock out force kN 250 250 250
Knock out stroke mm 80 80 80
Knock out Area mm 400x540 400x540 400x540
Outline dimension （F・B × L・R × H） mm 3430x2400
x4210		 3670x2580
x4600		 4150x2900
x5200
Net weight kg 42000 52000 64000
 
 
Valid CSS!Valid XHTML 1.0 Transitional
Home | Company Profile | Products | Online Enquiry | Contact Us
Copyright © 2010 GMT Power Press, All rights reserved
Web Designed and Developed by
Domain Registration, Web hosting, Web Design and Development, E-commerce Development, Search Engine Optimization(SEO), CBT Projects (Computer Based Training Projects), Corporate Presentation, Graphic Design, Multimedia and Corporate Branding Solutions.
 
 
 
 
 
 
For Corporate Details please visit :
www.gmtengineers.com
For Press Brake please visit :
www.gmtpressbrake.com
For Shearing Machine please visit :
www.gmtshears.com