Powerpress. 'C' type power press machines,Cross Shaft Power Press machines, Pneumatic clutch power press machines Wet clutch power press machines,straight-side power press machines, Servo power Press machines, Knuckle Joint power Press machines,Cold Forging power Press machines, Deep drawing powerpress machines

Chennai - 044-2489 6028

Coimbatore - +91-98409 11884

Bangalore - +91-99720 41883

Hyderabad - +91-98490 90128

C TYPE PRESS

STRAIGHT SIDE POWER PRESS

KNUCKLE JOINT

SERVO PRESSES

HIGH SPEED PRESSES

Yangli Hydraulic Power Presses

Main Features

	Welded Steel plate framework with cross beam, column and the base tightened and combined into one body by
	taut bolts.
	Main transmission pair adopts herringbone gears.
	Slide guiding adopts eight-face orthogonal guide rail or four-face with angles of 45^o degree guide rail.
	Pneumatic friction clutch and brake.
	Equipped with hydraulic overload protecting device.
	Automatic oil lubrication system with reqular time and capacity.
	Duplex valves imported from japan.
	Controlled by PLC with international brand.
	Buttons, Indicators, AC contactors, Air circuit breakers and other controlling devices are imported from
	international brand.
	Double loop control by imported electronic and mechanical cam controller.
	Air cushion included.
	Optional: front-back moving bolster, hydraulic cushion, low speed shut height adjustment and transmission
	system, light curtain
	JC36 series does not have guiding column and sleeves, series adopts guiding column and sleeves. The height
	in the technical parameters only confined ti JD36 series.
	Js series with T cross moving bolster, adjustable stroke of air cushion, four-side 45^oguide rail, guiding column
	and sleeves, combined wet clutch. (international brand).

Press Specifications

			JC36-250 jd36-250	JC36-400 Jd36-400	JC36-500 Jd36-500	JC36-630 Jd36-630
Nominal force		kN	2500	4000	5000	6300
Stroke under nominal force		mm	13	13	13	13
Slide block stroke		mm	400	400	500	500
Number of stroke		min^-1	20	15	12	10
Max die set height		mm	600	750	900	1000
Die set height adjustment		mm	250	315	340	340
Worktable dimensions (F・B × L・R × H）		mm	1250x2770 x160	1600x2800 x170	1600x3300 x200	1600x3450 x200
Dimensions of side block bottom surface （F・B × L・R）		mm	1050x2560	1600x2800	1600x3150	1600x3300
Stroke of materials to be punched (rigid)		mm	140	150	200	200
Distance between Gibs		mm	2620	2780	3250	3450
Cushion (Optional)	Pressing / Ejection force	kN	510/510	600/600	800/800	1000/1000
	stroke	mm	200	200	220	240
	Number		one cap	one cap	one cap	one cap
Outline dimenstion	FB	mm	2800	3100	3100	3200
	RL	mm	4600	5000	5300	5700
	Height above floor	mm	6000	6700	7600	7700
Total weight		T	55	95	110	140
Main motor capacity		kW	37	55	55	75
Direction for the displacement of worktable			/	/	/	/

			JC36-800 Jd36-800	JC36-800f Jd36-800f	js36-630b	js36-1000b
Nominal force		kN	8000	8000	6300	10000
Stroke under nominal force		mm	13	13	13	13
Slide block stroke		mm	500	500	500	400
Number of stroke		min^-1	10	10	12-18	12-18
Max die set height		mm	1000	1000	1300	1300
Die set height adjustment		mm	500	500	400	400
Worktable dimensions (F・B × L・R × H）		mm	1800x4000 x240	1800x4000	1900x3600	1900x3600
Dimensions of side block bottom surface （F・B × L・R）		mm	1600x3980	1600x3980	1800x3600	1800x3600
Stroke of materials to be punched (rigid)		mm	200	200	160	160
Distance between Gibs		mm	3700	3700	3600	3800
Cushion (Optional)	Pressing / Ejection force	kN	1300/1300	1300/1300	1000/1000	1000/1000
	stroke	mm	240	50-240	50-240	50-240
	Number		one cap	one cap	2	2
Outline dimenstion	FB	mm	3200	3100	4350	4600
	RL	mm	6200	6200	6300	6950
	Height above floor	mm	8100	8100	8000	8900
Total weight		T	150	185	220	240
Main motor capacity		kW	90	90	90	110
Direction for the displacement of worktable			/

Web Designed and Developed by

For Corporate Details please visit :
www.gmtengineers.com
For Press Brake please visit :
www.gmtpressbrake.com
For Shearing Machine please visit :
www.gmtshears.com